Hydrolysis Salts And Types
Table of Contents
Ionic Equilibrium - Degree of Ionization and Dissociation
Equilibrium Constant - Characteristics and Applications
Le Chatelier’s Principle on Equilibrium
Solubility and Solubility Product
Hydrolysis, Salts, and Types
Hydrolysis is a chemical reaction in which a molecule is split into two parts by the addition of a molecule of water.
Salt solutions are capable of undergoing a neutralization reaction, where the cation and anion react with each other to form their conjugate pairs. This reaction can result in an increase in the hydrogen or hydroxide ion concentrations, making the solution acidic or basic or neutral. Thus, salts are strong electrolytes which can ionize fully to form ions and can undergo hydrolysis, depending on the strength of the pairs.
Consider hydrolysis of esters
CH3COOCH3 + H2O → CH3COOH + CH3OH
Methyl acetate + Water → Acetic acid + Methanol
Consider a salt BA ionizing
(
Cation Hydrolysis
Anion Hydrolysis
(
Hydrolysis of Salt
\(\begin{array}{l}Acid + Base\rightleftharpoons Salt + Water\end{array} \)
Factors Determining the Extent of Hydrolysis
Hydrolysis Complete
If the cation/anion and water are stronger than their conjugate pairs, then B+ is more acidic than the conjugate hydronium ion and water is more basic than conjugate BOH; and A- is more basic than the conjugate hydroxide ion and water is more acidic than conjugate HA.
Answer: An ion that undergoes complete hydrolysis.
*
NH2⁻ and H⁻ form a basic solution.
form basic solution.
No Hydrolysis
If the cation/anion and water are weaker than their conjugate pairs, B+ is less acidic than the conjugate hydronium ion and conjugate BOH is more basic than water, A- is less basic than the conjugate hydroxide ion and water is less acidic than conjugate HA.
Answer: An ion that does not undergo complete hydrolysis.
Cations of strong bases:
- Alkali ions
- Alkaline metal ions
Anions of Strong Acids:
- Chloride
- Nitrate
- Sulphate
- Phosphate
- Chlorate
Na+ + H2O → NaOH + H3O+
H2O + Cl- → HCl + OH-
Limited Hydrolysis
When the cations or anions are not as strong compared to their conjugate pairs, hydrolysis relative to strength will occur and the solution may be either acidic or basic.
Cations of weak bases undergoing limited hydrolysis result in an acidic solution, while anions of weak acids undergoing limited hydrolysis yield a basic solution.
NH4+, Al3+ CH3COO-, CN-. C2O42-, PO43-
(
(
What are Salts?
Salts are a type of cryptographic primitive used to protect passwords and other sensitive data. They are randomly generated strings of characters that are appended to a user’s password before it is hashed. This makes it more difficult for attackers to guess passwords using brute-force attacks.
Acid and base react to form a salt; salts are classified into four categories.
The salt of a strong acid and strong base is NaCl.
Salt of the strong acid and weak base:
- NH4Cl
- FeCl3
- CuCl2
- AlCl3
- CuSO4
Salt of the weak acid and strong base –
CH3COONa, NaCN, NaHCO3, Na2CO3
The salt of the weak acid and weak base is:
- CH3COONH4
- (NH4)2CO3
- NH4HCO3
pH of Aqueous Solutions of Salt of a Strong Acid and Strong Base
The solution of a strong acid and base will be neutral, with a pH of 7, as anions and cations of these compounds do not undergo hydrolysis with water.
pH of Aqueous Solutions of Salt of a Strong Acid and Weak Base
Examples: NH4Cl, FeCl3, CuCl2, AlCl3, CuSO4
Only the cation of the weak base undergoes hydrolysis, resulting in an acidic solution.
Say, h
be the degree of hydrolysis.
NH4+ + Cl- ⇆ NH4Cl
NH4+ + H2O ⇆ NH4OH + H+
At the Start, Concentration (mole/L): C = 0
C
(
1 - h = 1
For the equilibrium,
For the equilibrium
(
For the equilibrium, it is essential to maintain a balance.
(
(
(
(
pH Aqueous Solutions of Salt of Strong Acid and Weak Base
(
pH of Aqueous Solutions of Salt of Weak Acid and Strong Base
Examples:
- CH3COONa
- NaCN
- NaHCO3
- Na2CO3
(
At the Start, Concentration (mole/L) : C = 0
C(1-h)ChCh at equilibrium
(
1 - h = 1
(
#For the Equilibrium
For the equilibrium,
For the equilibrium,
(
(\frac{[CH_{3}COOH][OH^{-}]}{[CH_{3}COO^{-}]} \times \frac{[CH_{3}COO^{-}][H^{+}]}{[CH_{3}COOH]} = [H^{+}][OH^{-}])
Kh = Kw/Ka
Kw = Kh * Ka
So,
(
(
The pH of an aqueous solution of salt, a weak acid, and a strong base
$$\begin{array}{l} pH = \frac{1}{2}\left[pK_w + pK_b + \log c\right] \end{array}$$
pH of Aqueous Solutions of Salt of Weak Acid and Weak Base
Examples:
- CH3COONH4
- (NH4)2CO3
- NH4HCO3
(
(
At Start, Concentration (mole/L): CC = 0
C(1-h)2 Ch2
(
(
For the equilibrium:
(
(
For the equilibrium:
(
For the equilibrium:
(
(
(
(
(
pH of Aqueous Solutions of Salt of Weak Acid and Strong Base
(
e) pH of Polyprotic Acids and Their Salts
1) pH of Polyprotic Acids:
Polyprotic acids are acids that can ionize to give two or more hydrogen ions.
Examples: Sulphuric, phosphoric, carbonic, oxalic acid are some.
These acids ionize in steps, but the ionization may cease after the first ionization unless it is necessary.
Due to the production of common ions in earlier steps.
Orthophosphoric acid can ionize in three steps to yield three hydrogen ions as follows.
(
(
(
For all acids, Ka1 > Ka2 > Ka3…
So, the pH of acids is calculated based on the first ionization constant only.
For weak acids,
(\therefore K_{a_1} = \sqrt{\frac{[H^+] \cdot Ka_1}{c}} ;;;; [H^+] ; of ; ion = cH )
and
(
2) pH of Salts of Polyprotic Acids: K3PO4, Na2CO3, FeCl3, (NH4)C2O4
Salts will be completely ionized
(
Phosphate hydrolyzes as follows:
(
(
(
(
$\begin{array}{l}[H_{2}PO_{4}^{-}] + [H_{2}O] \rightleftharpoons [H_{3}PO_{4}]+[OH]\end{array}$
[PO43-] + H2O –> [HPO42-] + [OH–]
At equilibrium,
moles
(
(
(
(
Hence
(
( pH = -\frac{1}{2}(pK_w + pK_{a3} + \log C) )
The pH of Salts of Polyprotic Acids
(
Hydrolysis of Amphoteric Anion
Examples: NaHCO3, NaHS
Amphoteric anions can ionize to give hydrogen ions and hydrolyze to give hydroxide ions.
⇒ Ionization
⇒ Hydrolysis
\(\begin{array}{l} pH_{(HCO_3^-)} = \frac{pK_a1 + pK_a2}{2} \end{array}\)