Chapter 09 Structured Query Language (SQL)

“Any unique image that you desire probably already exists on the internet or in some database… The problem today is no longer how to create the right image, but how to find an already existing one.”

$\quad$ - Lev Manovich

9.1 INTRODUCTION

We have learnt about Relational Database Management Systems (RDBMS) and its purpose in the previous chapter. There are many RDBMS such as MySQL, Microsoft SQL Server, PostgreSQL, Oracle, etc. that allow us to create a database consisting of relations. These RDBMS also allow us to store, retrieve and manipulate data on that database through queries. In this chapter, we will learn how to create, populate and query databases using MySQL.

9.2 STRUCTURED QUERY LANGUAGE (SQL)

One has to write application programs to access data in case of a file system. However, for database management systems there are special kinds of languages called query language that can be used to access and manipulate data from the database. The Structured Query Language (SQL) is the most popular query language used by major relational database management systems such as MySQL, ORACLE, SQL Server, etc.

Activity 9.1

Find and list other types of databases other than RDBMS.

SQL is easy to learn as the statements comprise of descriptive English words and are not case sensitive. We can create and interact with a database using SQL easily. Benefit of using SQL is that we do not have to specify how to get the data from the database. Rather, we simply specify what is to be retrieved, and SQL does the rest. Although called a query language, SQL can do much more, besides querying. SQL provides statements for defining the structure of the data, manipulating data in the database, declaring constraints and retrieving data from the database in various ways, depending on our requirements.

In this chapter, we will use the StudentAttendance discussed in chapter 8 and create a database. We will also learn how to populate databases with data, manipulate data and retrieve data from a database through SQL queries.

9.2.1 Installing MySQL

MySQL is an open source RDBMS software which can be easily downloaded from the official website https:// dev.mysql.com/downloads. After installing MySQL, start MySQL service. The appearance of mysql> prompt (Figure 9.1) means that MySQL is ready to accept SQL statements.

Figure 9.1: MySQL Shell

Following are some important points to be kept in mind while using SQL:

  • SQL is case insensitive. For example, the column names ‘salary’ and ‘SALARY’ are the same for SQL.
  • Always end SQL statements with a semicolon (;).
  • To enter multiline SQL statements, we don’t write “;” after the first line. We press the Enter key to continue on the next line. The prompt mysql> then changes to “->", indicating that statement is continued to the next line. After the last line, put “;” and press enter.

9.3 DATA TYPES AND CONSTRAINTS IN MYSQL

We know that a database consists of one or more relations and each relation (table) is made up of attributes (column). Each attribute has a data type. We can also specify constraints for each attribute of a relation.

Activity 9.2

What are the other data types supported in MySQL? Are there other variants of integer and float data type?

9.3.1 Data type of Attribute

Data type of an attribute indicates the type of data value that an attribute can have. It also decides the operations that can be performed on the data of that attribute. For example, arithmetic operations can be performed on numeric data but not on character data. Commonly used data types in MySQL are numeric types, date and time types, and string types as shown in Table 9.1.

$\hspace{4cm}$ Table 9.1 Commonly used data types in MySQL

Data type Description
CHAR $(n)$ Specifies character type data of length $\mathrm{n}$ where $\mathrm{n}$ could be any value from 0 to
255. CHAR is of fixed length, means, declaring CHAR (10) implies to reserve
spaces for 10 characters. If data does not have 10 characters (e.g., ‘city’ has
four characters), MySQL fills the remaining 6 characters with spaces padded
on the right.
VARCHAR$(n)$ Specifies character type data of length where $\mathrm{n}$ could be any value from 0 to
65535. But unlike CHAR, VARCHAR(n) is a variable-length data type. That is,
declaring VARCHAR (30) means a maximum of 30 characters can be stored but
the actual allocated bytes will depend on the length of entered string. So “city”
in VARCHAR (30) will occupy space needed to store 4 characters only.
INT INT specifies an integer value. Each INT value occupies 4 bytes of storage. The
range of unsigned values allowed in a 4 byte integer type are 0 to $4,294,967,295$.
For values larger than that, we have to use BIGINT, which occupies 8 bytes.
FLOAT Holds numbers with decimal points. Each FLOAT value occupies 4 bytes.
DATE The DATE type is used for dates in ‘YYYY-MM-DD’ format. YYYY is the 4 digit
year, MM is the 2 digit month and DD is the 2 digit date. The supported range
is ’ $1000-01-01$ ’ to ’ $9999-12-31$ ‘.

Think and Reflect

Which two constraints when applied together will produce a Primary Key constraint?

9.3.2 Constraints

Constraints are the certain types of restrictions on the data values that an attribute can have. Table 9.2 lists some of the commonly used constraints in SQL. They are used to ensure correctness of data. However, it is not mandatory to define constraints for each attribute of a table.

$\hspace{3.5cm}$ Table 9.2 Commonly used SQL Constraints

Constraint Description
NOT NULL Ensures that a column cannot have NULL values where NULL means missing/
unknown/not applicable value.
UNI QUE Ensures that all the values in a column are distinct/unique
DEFAULT A default value specified for the column if no value is provided
PRI MARY KEY The column which can uniquely identify each row/record in a table.
FOREIGN KEY The column which refers to value of an attribute defined as primary key in another
table

9.4 SQL FOR DATA DEFINITION

In order to be able to store data we need to first define the relation schema. Defining a schema includes creating a relation and giving name to a relation, identifying the attributes in a relation, deciding upon the datatype for each attribute and also specify the constraints as per the requirements. Sometimes, we may require to make changes to the relation schema also. SQL allows us to write statements for defining, modifying and deleting relation schemas. These are part of Data Definition Language (DDL).

We have already learned that the data are stored in relations or tables in a database. Hence, we can say that a database is a collection of tables. The Create statement is used to create a database and its tables (relations). Before creating a database, we should be clear about the number of tables the database will have, the columns (attributes) in each table along with the data type of each column, and its constraint, if any.

9.4.1 CREATE Database

To create a database, we use the CREATE DATABASE statement as shown in the following syntax:

CREATE DATABASE databasename;

To create a database called StudentAttendance, we will type following command at mysql prompt. mysql> CREATE DATABASE studentattendance;

Query OK, 1 row affected $(0.02 \mathrm{sec})$

Note: In LINUX environment, names for database and tables are case-sensitive whereas in WINDOWS, there is no such differentiation. However, as a good practice, it is suggested to write database/table name in the same letter cases that were used at the time of their creation.

A DBMS can manage multiple databases on one computer. Therefore, we need to select the database that we want to use. To know the names of existing databases, we use the statement SHOW DATABASES. From the listed databases, we can select the database to be used. Once the database is selected, we can proceed with creating tables or querying data.

In order to use the StudentAttendance database, the following SQL statement is required.

mysql> USE StudentAttendance;
Database changed

Initially, the created database is empty. It can be checked by using the show tables statement that lists names of all the tables within a database.

names of all the tables within a database.
mysql> SHOW TABLES;
Empty set (0.06 sec)

Activity 9.3

Type the statement show database; Does it show the name of StudentAttendance database?

9.4.2 CREATE Table

After creating a database StudentAttendance, we need to define relations in this database and specify attributes for each relation along with data type and constraint (if any) for each attribute. This is done using the CREATE TABLE statement.

Syntax:

CREATE TABLE tablename(
attributename1 datatype constraint,
attributename2 datatype constraint, :
attributenameN datatype constraint);

It is important to observe the following points with respect to the CREATE TABLE statement:

  • The number of columns in a table defines the degree of that relation, which is denoted by N.

  • Attribute name specifies the name of the column in the table.

  • Datatype specifies the type of data that an attribute can hold.

  • Constraint indicates the restrictions imposed on the values of an attribute. By default, each attribute can take NULL values except for the primary key.

Let us identify data types of the attributes of table STUDENT along with their constraints (if any). Assuming maximum students in a class to be 100 and values of roll number in a sequence from 1 to 100, we know that 3 digits are sufficient to store values for the attribute RollNumber. Hence, data type INT is appropriate for this attribute. Total number of characters in a student name (SName) can differ. Assuming maximum characters in a name as 20, we use VARCHAR(20) for the SName column. Data type for the attribute SDateofBirth is DATE and supposing the school uses guardian’s 12 digit Aadhaar number as GUID, we can declare GUID as CHAR (12) since Aadhaar number is of fixed length and we are not going to perform any mathematical operation on GUID.

Table 9.3, 9.4 and 9.5 shows the chosen data type and constraint for each attribute of the relations STUDENT, GUARDIAN and ATTENDANCE, respectively.

$\hspace{1.5cm}$ Table 9.3 Data types and constraints for the attributes of relation STUDENT

Attribute Name Data expected to be stored Data type Constraint
RollNumber Numeric value consisting of maximum 3 digits I NT PRI MARY KEY
SName Variant length string of maximum 20 characters VARCHAR (20) NOT NULL
SDateofBirth Date value DATE NOT NULL
GUID Numeric value consisting of 12 digits CHAR (12) FOREIGN KEY

$\hspace{1.3cm}$ Table 9.4 Data types and constraints for the attributes of relation GUARDIAN

Attribute Name Data expected to be stored Data type Constraint
GUID Numeric value consisting of 12 digit Aadhaar
number
CHAR (12) PRI MARY KEY
GName Variant length string of maximum
characters
VARCHAR(20) NOT NULL
GPhone Numeric value consisting of 10 digits CHAR(10) NULL UNI QUE
GAddress Variant length String of size 30 characters VARCHAR(30) NOT NULL

$\hspace{0.6cm}$ Table 9.5 Data types and constraints for the attributes of relation ATTENDANCE.

Attribute Name Data expected to be stored Data type Constraint
AttendanceDate Date value DATE PRI MARY KEY*
RollNumber Numeric value consisting of maximum 3
digits
I NT PRI MARY KEY*
FOREIGN KEY
AttendanceStatus ‘P’ for present and ‘A’ for absent CHAR(1) NOT NULL

${ }^{*}$ means part of composite primary key.

Once data types and constraints are identified, let us create tables without specifying constraints along with the attribute name for simplification. We will learn to incorporate constraints on attributes in Section 9.4.4.

Think and Reflect

Which datatype out of Char and Varchar will you prefer for storing contact number(mobile number)? Discuss.

Example 9.1 Create table STUDENT.

mysql> CREATE TABLE STUDENT(
$\qquad$ -> RollNumber INT,
$\qquad$ -> SName VARCHAR(20),
$\qquad$ -> SDateofBirth DATE,
$\qquad$ -> GUID CHAR (12),
$\qquad$ -> PRIMARY KEY (RollNumber));
Query OK, 0 rows affected (0.91 sec)

Note: “,” is used to separate two attributes and each statement terminates with a semi-colon (;). The arrow (->) is an interactive continuation prompt. If we enter an unfinished statement, the SQL shell will wait for us to enter the rest of the statement.

9.4.3 Describe Table

We can view the structure of an already created table using the DESCRIBE statement or DESC statement.

Syntax:

DESCRIBE tablename;
mysql> DESCRIBE STUDENT;

Field Type Null Key Default Extra
Rol I Number
SNa me
SDat eof Birth
GUI D
int
varchar(20)
date
char(12)
NO
YES
YES
YES
PRI NULL
NULL
NULL
NULL

4 rows in set (0.06 sec)

We can use the SHOW TABLES statement to see the tables in the StudentAttendance database. So far, we have only the STUDENT table.

mysql > SHOW TABLES;

Tables_in_studentattendance
student

1 row in set (0.00 sec)

Activity 9.4

Create the other two relations GUARDIAN and ATTENDANCE as per data types given in Table 9.4 and 9.5 respectively, and view their structures. Do not add any constraint in these two tables.

9.4.4 ALTER Table

After creating a table, we may realise that we need to add/remove an attribute or to modify the datatype of an existing attribute or to add constraint in attribute. In all such cases, we need to change or alter the structure (schema) of the table by using the alter statement.

(A) Add primary key to a relation

Let us now alter the tables created in Activity 9.4. The following MySQL statement adds a primary key to the GUARDIAN relation:

mysql> ALTER TABLE GUARDIAN ADD PRI MARY KEY (GUID);
$\qquad$ Query OK, O rows affected ( 1.14 sec)
$\qquad$ Records: O Duplicates: O Warnings: 0

Now let us add the primary key to the ATTENDANCE relation. The primary key of this relation is a composite key made up of two attributes - AttendanceDate and RollNumber.

mysql> ALTER TABLE ATTENDANCE
$\qquad$ -> ADD PRIMARY KEY(AttendanceDate,
$\quad$ RollNumber);
$\quad$ Query OK, 0 rows affected (0.52 sec)
$\quad$ Records: 0 Duplicates: 0 Warnings: 0

Activity 9.5

Add foreign key in the ATTENDANCE table (use Figure 9.1) to identify referencing and referenced tables).

(B) Add foreign key to a relation

Once primary keys are added, the next step is to add foreign keys to the relation (if any). Following points need to be observed while adding foreign key to a relation:

  • The referenced relation must be already created.
  • The referenced attribute(s) must be part of the primary key of the referenced relation.
  • Data types and size of referenced and referencing attributes must be the same.

Syntax:

ALTER TABLE table name ADD FOREIGN KEY(attribute name) REFERENCES referenced_table_name (attribute name);

Let us now add foreign key to the table STUDENT. Table 9.3 shows that attribute GUID (the referencing attribute) is a foreign key and it refers to attribute GUID (the referenced attribute) of table GUARDIAN. Hence, STUDENT is the referencing table and GUARDIAN is the referenced table as shown in Figure 8.4 in the previous chapter.

mysql> ALTER TABLE STUDENT
$\qquad$ -> ADD FOREIGN KEY(GUID) REFERENCES
$\qquad$ -> GUARDIAN(GUID);
$\quad$ Query OK, 0 rows affected (0.75 sec)
$\quad$ Records: 0 Duplicates: 0 Warnings: 0

Think and Reflect

Name foreign keys in table ATTENDANCE and STUDENT. Is there any foreign key in table GUARDIAN.

(C) Add constraint UNIQUE to an existing attribute

In GUARDIAN table, the attribute GPhone has a constraint UNIQUE which means no two values in that column should be the same.

Syntax:

ALTER TABLE table_name ADD UNI QUE (attribute na me);

Let us now add the constraint UNIQUE with the attribute GPhone of the table GUARDIAN as shown at table 9.4.

mysql> ALTER TABLE GUARDIAN
$\qquad$ -> ADD UNIQUE(GPhone);
$\quad$ Query OK, 0 rows affected (0.44 sec)
$\quad$ Records: 0 Duplicates: 0 Warnings: 0

(D) Add an attribute to an existing table

Sometimes, we may need to add an additional attribute in a table. It can be done using the ADD attribute statement as shown in the following Syntax:

ALTER TABLE table_name ADD attribute name DATATYPE;

Suppose, the principal of the school has decided to award scholarship to some needy students for which income of the guardian must be known. But, the school has not maintained the income attribute with table GUARDIAN so far. Therefore, the database designer now needs to add a new attribute Income of data type INT in the table GUARDIAN.

mysql> ALTER TABLE GUARDIAN
$\qquad$ -> ADD income INT;
$\quad$ Query OK, 0 rows affected (0.47 sec)
$\quad$ Records: 0 Duplicates: 0 Warnings: 0

(E) Modify datatype of an attribute

We can change data types of the existing attributes of a table using the following ALTER statement.

Syntax:

ALTER TABLE table_name MODIFY attribute DATATYPE;

Suppose we need to change the size of the attribute GAddress from VARCHAR(30) to VARCHAR(40) of the GUARDIAN table. The MySQL statement will be:

mysql> ALTER TABLE GUARDIAN
$\qquad$ -> MODIFY GAddress VARCHAR(40);
$\qquad$ Query OK, 0 rows affected (0.11 sec)
$\qquad$ Records: 0 Duplicates: 0 Warnings: 0

(F) Modify constraint of an attribute

When we create a table, by default each attribute takes NULL value except for the attribute defined as primary key. We can change an attribute’s constraint from NULL to NOT NULL using an alter statement.

Syntax:

ALTER TABLE table name MODIFY attribute DATATYPE NOT NULL;

Note: We have to specify the data type of the attribute along with constraint NOT NULL while using MODIFY.

To associate NOT NULL constraint with attribute SName of table STUDENT (table 9.3), we write the following MySQL statement:

mysql> ALTER TABLE STUDENT
$\qquad$ -> MODIFY SName VARCHAR(20) NOT NULL;
$\qquad$Query OK, 0 rows affected (0.47 sec)
$\qquad$Records: 0 Duplicates: 0 Warnings: 0

Think and Reflect

What are the minimum and maximum income values that can be entered in the income attribute given the data type is INT?

(G) Add default value to an attribute

If we want to specify default value for an attribute, then use the following syntax:

ALTER TABLE table_name MODIFY attribute DATATYPE
DEFAULT default _ value;

To set default value of SDateofBirth of STUDENT to $15^{\text {th }}$ May 2000, write the following statement:

mysql> ALTER TABLE STUDENT
$\qquad$ -> MODIFY SDateofBirth DATE DEFAULT ‘2000-05-15’;
$\quad$ Query OK, 0 rows affected (0.08 sec)
$\quad$ Records: 0 Duplicates: 0 Warnings: 0

Note: We have to specify the data type of the attribute along with DEFAULT while using MODIFY.

(H) Remove an attribute

Using ALTER, we can remove attributes from a table, as shown in the following syntax:

ALTER TABLE table_name DROP attribute;
To remove the attribute income from table
GUARDIAN (Table 9.4), write the following MySQL statement:

mysql> ALTER TABLE GUARDIAN DROP income;
$\qquad$ Query OK, 0 rows affected (0.42 sec)
$\qquad$ Records: 0 Duplicates: 0 Warnings: 0

(I) Remove primary key from the table

Sometime there may be a requirement to remove primary key constraint from the table. In that case, Alter table command can be used in the following way:

Syntax:

ALTER TABLE table_name DROP PRI MARY KEY;

To remove primary key of table GUARDIAN (Figure 9.4), write the following MySQL statement:

mysql> ALTER TABLE GUARDIAN DROP PRIMARY KEY;
$\qquad$ Query OK, 0 rows affected (0.72 sec)
$\qquad$ Records: 0 Duplicates: 0 Warnings: 0

Note: We have dropped the primary key from the GUARDIAN table, but each table should have a primary key to maintain uniqueness. Hence, we have to use the ADD statement with the Alter Table command to specify the primary key for the GUARDIAN table as shown in earlier examples.

9.4.5 DROP Statement

Sometimes a table in a database or the database itself needs to be removed. We can use a DROP statement to remove a database or a table permanently from the system. However, one should be very cautious while using this statement as it cannot be undone.

Syntax to drop a table:

DROP TABLE table_name;

Syntax to drop a database:

DROP DATABASE database name;

Note: Using the DROP statement to remove a database will ultimately remove all the tables within it.

9.5 SQL FOR DATA MANIPULATION

In the previous section, we created the database StudentAttendance having three relations STUDENT, GUARDIAN and ATTENDANCE. When we create a table, only its structure is created but the table has no data. To populate records in the table, INSERT statement is used. Also, table records can be deleted or updated using DELETE and UPDATE statements. These SQL statements are part of Data Manipulation Language (DML).

Data Manipulation using a database means either insertion of new data, removal of existing data or modification of existing data in the database

9.5.1 INSERTION of Records

I NSERT I NTO statement is used to insert new records in a table. Its syntax is:

INSERT I NTO tabl ename
VALUES (value 1, value 2, $\ldots$ );

Here, value 1 corresponds to attribute 1 , value 2 corresponds to attribute 2 and so on. Note that we need not to specify attribute names in the insert statement if there are exactly the same numbers of values in the INSERT statement as the total number of attributes in the table.

Caution: While populating records in a table with foreign key, ensure that records in referenced tables are already populated.

Let us insert some records in the StudentAttendance database. We shall insert records in the GUARDIAN table first as it does not have any foreign key. A set of sample records for GUARDIAN table is shown in the given table (Table 9.6).

$\hspace{4.5cm}$ Table 9.6 GUARDIAN Table

GUID GName GPhone GAddress
444444444444 Amit Ahuja 5711492685 G-35, Ashok Vihar, Delhi
111111111111 Baichung Bhutia 3612967082 Flat no. 5, Darjeeling Appt., Shimla
101010101010 Himanshu Shah 4726309212 26/77, West Patel Nagar, Ahmedabad
333333333333 Danny Dsouza S -13, Ashok Village, Daman
466444444666 Sujata P. 3801923168 HNO-13, B- block, Preet Vihar, Madurai

The following insert statement adds the first record in the table:

mysql> INSERT INTO GUARDIAN
$\qquad$ -> VALUES (444444444444, ‘Amit Ahuja’,
$\qquad$ -> 5711492685, ‘G-35,Ashok vihar, Delhi’ );
$\qquad$ Query OK, 1 row affected (0.01 sec)

We can use the SQL statement SELECT * from table_name to view the inserted records. The SELECT statement will be explained in the next section.

mysql> SELECT * from GUARDIAN;

GUID GName Gphone GAddress
444444444444 Amit Ahuja 5711492685 G-35, Ashok vihar, Delhi

1 row in set (0.00 sec)

If we want to insert values only for some of the attributes in a table (supposing other attributes having NULL or any other default value), then we shall specify the attribute names in which the values are to be inserted using the following syntax of INSERT INTO statement.

Syntax:

I NSERT I NTO tablename (column1, column2, …)
VALUES (value1, value2, …);

To insert the fourth record of Table 9.6 where GPhone is not given, we need to insert values in the other three fields (GPhone was set to NULL by default at the time of table creation). In this case, we have to specify the names of attributes in which we want to insert values. The values must be given in the same order in which attributes are written in INSERT statement.

Activity 9.6

Write SQL statements to insert the remaining 3 rows of table 9.6 in table GUARDIAN.

mysql> INSERT INTO GUARDIAN(GUID, GName, GAddress)
$\qquad$ -> VALUES (333333333333, ‘Danny Dsouza’,
$\qquad$ -> ‘S -13, Ashok Village, Daman’ );
$\qquad$ Query OK, 1 row affected (0.03 sec)

Note: Text and date values must be enclosed in “’ (single quotes).

mysql> SELECT * from GUARDIAN;

GUID GName Gphone GAddress
333333333333
444444444444
Danny Dsouza
Amit Ahuja
NULL
5711492685
S -13 , Ashok village, Daman
G-35, Ashok vihar, Delhi

Let us now insert the records given in Table 9.7 into the STUDENT table.

$\hspace{3cm}$ Table 9.7 STUDENT Table

RollNumber SName SDateofBirth GUID
1 Atharv Ahuja 2003-05-15 444444444444
2 Daizy Bhutia 2002-02-28 11111111111
3 Taleem Shah 2002-02-28
4 John Dsouza 2003-08-18 33333333333
6 Ali Shah 2003-07-05 101010101010

To insert the first record of Table 9.7, we write the following MySQL statement

mysql> INSERT INTO STUDENT
$\quad$ -> VALUES(1,‘Atharv Ahuja’,‘2003-05-15’,
$\quad$ 444444444444);
$\quad$ Query OK, 1 row affected (0.11 sec)
$\quad$ OR
$\quad$ mysql> INSERT INTO STUDENT (RollNumber, SName,
$\quad$ SDateofBirth, GUID)
$\qquad$ -> VALUES (1,‘Atharv Ahuja’,‘2003-05-15’,
$\quad$ 444444444444);
$\quad$ Query OK, 1 row affected (0.02 sec)

Recall that Date is stored in ‘YYYY-MM-DD’ format.

mysql> SELECT * from STUDENT;

RollNumber SName SDateofBirth GUID
1 Atharv Ahuja 2003-05-15 444444444444

Let us now insert the third record of Table 9.7 where GUID is NULL. Recall that GUID is foreign key of this table and thus can take NULL value. Hence, we can put NULL value for GUID and insert the record by using the following statement:

Activity 9.7

Write SQL statements to insert the remaining 4 rows of table 9.7 in table STUDENT.

mysql> INSERT INTO STUDENT
$\qquad$ -> VALUES(3, ‘Taleem Shah’,‘2002-02-28’, NULL);
$\qquad$ Query OK, 1 row affected (0.05 sec)

mysql> SELECT * from STUDENT;

RollNumber SName SDateofBirth GUID
1 Atharv Ahuja 2003-05-15 444444444444
2 Taleem Shah 2002-02-28 NULL

We had to write NULL in the above insert statement because we are not mentioning the column names. Otherwise, we should mention the names of attributes along with the values if we need to insert data only for certain attributes, as shown in the following query:

mysql> INSERT INTO STUDENT (RollNumber, SName,
$\qquad$ -> SDateofBirth) VALUES (3, ‘Taleem Shah’,‘2002-02-28’);
$\qquad$ Query OK, 1 row affected (0.05 sec)

Think and Reflect

  • Which of the two insert statement should be used when the order of data to be inserted are not known?
  • Can we insert two records with the same roll number?

9.6 SQL FOR DATA QUERY

So far we have learnt how to create a database and how to store and manipulate data in them. We are interested in storing data in a database as it is easier to retrieve data in future from databases in whatever way we want. SQL provides efficient mechanisms to retrieve data stored in multiple tables in MySQL database (or any other RDBMS). The SQL statement SELECT is used to retrieve data from the tables in a database and is also called a query statement.

9.6.1 SELECT Statement

The SQL statement SELECT is used to retrieve data from the tables in a database and the output is also displayed in tabular form.

Syntax:

SELECT attribute1, attribute2, …
FROM table_name
WHERE condition;

Here, attribute 1 , attribute $2, \ldots$ are the column names of the table table_name from which we want to retrieve data. The FROM clause is always written with SELECT clause as it specifies the name of the table from which data is to be retrieved. The WHERE clause is optional and is used to retrieve data that meet specified condition(s).

To select all the data available in a table, we use the following select statement:

SELECT * FROM table_name;

Example 9.2 The following query retrieves the name and date of birth of student with roll number 1 :

mysql> SELECT SName, SDateofBirth
$\qquad$ -> FROM STUDENT
$\qquad$ -> WHERE RollNumber = 1;

SName SDateofBirth
Atharv Ahuja 2003-05-15

1 row in set (0.03 sec)


Think and Reflect

Think and list few examples from your daily life where storing the data in the database and querying the same can be helpful.

9.6.2 QUERYING using Database OFFICE

Organisations maintain databases to store data in the form of tables. Let us consider the database OFFICE of an organisation that has many related tables like EMPLOYEE, DEPARTMENT and so on. Every EMPLOYEE in the database is assigned to a DEPARTMENT and his/her Department number (DeptId) is stored as a foreign key in the table EMPLOYEE. Let us consider the relation ‘EMPLOYEE’ as shown in Table 9.8 and apply the SELECT statement to retrieve data:

Table 9.8 Records to be inserted into the EMPLOYEE table

EmpNo Ename Salary Bonus Deptld
101 Aaliya 10000 234 D02
102 Kritika 60000 123 D01
103 Shabbbir 45000 566 D01
104 Gurpreet 19000 565 D04
105 Joseph 34000 875 D03
106 Sanya 48000 695 D02
107 Vergese 15000 D01
108 Nachaobi 29000 D05
109 Daribha 42000 D04
110 Tanya 50000 467 D05

(A) Retrieve selected columns

The following query selects employee numbers of all the employees:

mysql> SELECT EmpNo FROM EMPLOYEE;

EmpNo
101
102
103
104
105
106
107
108
109
110

10 rows in set (0.41 sec)

The following query selects the employee number and employee name of all the employees, we write:

mysql> SELECT EName as Name FROM EMPLOYEE;

EmpNo Ename
101 Aaliya
102 Kritika
103 Shabbir
104 Gurpreet
105 Joseph
106 Sanya
107 Vergese
108 Nachaobi
109 Daribha
110 Tanya

10 rows in set (0.00 sec)

(B) Renaming of columns

In case we want to rename any column while displaying the output, it can be done by using the alias ‘AS’. The following query selects Employee name as Name in the output for all the employees:

mysql> SELECT EName as Name FROM EMPLOYEE;

Name
Aaliya
Kritika
Shabbir
Gurpreet
Joseph
Sanya
Vergese
Nachaobi
Daribha
Tanya

10 rows in set (0.00 sec)

Example 9.3 Select names of all employees along with their annual income (calculated as Salary12). While displaying the query result, rename the column EName as Name mysql>SELECT EName as Name, Salary 12 From EMPLOYEE;

Name Salary*12
Aaliya 120000
Kritika 720000
Shabbir 540000
Gurpreet 228000
Joseph 408000
Sanya 576000
Vergese 180000
Nachaobi 348000
Daribha 504000
Tanya 600000

10 rows in set (0.02 sec)

Observe that in the output, Salary* 12 is displayed as the column name for the Annual Income column. In the output table, we can use alias to rename that column as Annual Income as shown below:

mysql> SELECT Ename AS Name, Salary*12 AS ‘Annual Income

-> FROM EMPLOYEE;

Name Annual Income
Aaliya 120000
Kritika 720000
Shabbir 540000
Gurpreet 228000
Joseph 408000
Sanya 576000
Vergese 180000
Nachaobi 348000
Daribha 504000
Tanya 600000

10 rows in set (0.00 sec)

Note: Annual Income will not be added as a new column in the database table. It is just for displaying the output of the query.

If an aliased column name has space as in the case of Annual Income, it should be enclosed in quotes as ‘Annual Income

(C) Distinct Clause

By default, SQL shows all the data retrieved through query as output. However, there can be duplicate values. The SELECT statement when combined with DISTINCT clause, returns records without repetition (distinct records). For example, while retrieving a department number from employee relation, there can be duplicate values as many employees are assigned to the same department. To select unique department number for all the employees, we use DISTINCT as shown below:

mysql > SELECT DISTINCT DeptId FROM EMPLOYEE;

DeptId
D02
D01
D04
D03
D05

5 rows in set (0.03 sec)

(D) WHERE Clause

The WHERE clause is used to retrieve data that meet some specified conditions. In the OFFICE database, more than one employee can have the same salary. Following query gives distinct salaries of the employees working in the department number D01:

mysql> SELECT DISTINCT Salary
$\qquad$ -> FROM EMPLOYEE
$\qquad$ -> WHERE Deptid=‘D01’;

As the column DeptId is of string type, its values are enclosed in quotes (‘D01’).

Salary
60000
45000
15000

3 rows in set (0.02 sec)

In the above example, $=$ operator is used in the WHERE clause. Other relational operators $(<,<=,>$, >=, !=) can be used to specify such conditions. The logical operators AND, OR, and NOT are used to combine multiple conditions.

Example 9.4 Display all the details of those employees of D04 department who earn more than 5000.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> WHERE Salary > 5000 AND DeptId = ‘D04’;

EmpNo Ename Salary Bonus DeptId
104 Gurpreet 19000 565 D04
109 Daribha 42000 NULL D04

2 rows in set (0.00 sec)

Example 9.5 The following query selects records of all the employees except Aaliya.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> WHERE NOT Ename = ‘Aaliya’;

E mp No Ename Sal ary Bonus DeptId
102 Kritika 60000 123 D0 1
103 Shabbir 45000 566 D0 1
104 Gurpreet 19000 565 D0 4
105 Joseph 34000 875 D0 3
106 Sanya 48000 695 D02
107 Vergese 15000 NULL D0 1
108 Nachaobi 29000 NULL D05
109 Daribha 42000 NULL D0 4
110 Tanya 50000 467 D0 5

9 rows in set (0.00 sec)

Think and Reflect

What will happen if in the above query we write “Aaliya” as “AALIYA” or “aaliya” or “AaLIYA”? Will the query generate the same output or an error?

Example 9.6 The following query selects the name and department number of all those employees who are earning salary between 20000 and 50000 (both values inclusive).

mysql> SELECT Ename, DeptId
$\qquad$ -> FROM EMPLOYEE
$\qquad$ -> WHERE Salary>=20000 AND Salary<=50000;

Ename DeptId
Shabbir D01
Joseph D03
Sanya D02
Nachaobi D05
Daribha D04
Tanya D05

6 rows in set (0.00 sec)

SELECT * FROM EMPLOYEE
WHERE Salary >5000 OR Deptld =20;

The query in example 9.6 defines a range that can also be checked using a comparison operator BETWEEN, as shown below:

mysql> SELECT Ename, DeptId
$\qquad$ -> FROM EMPLOYEE
$\qquad$ -> WHERE Salary BETWEEN 20000 AND 50000;

Ename DeptId
Shabbir D01
Joseph D03
Sanya D02
Nachaobi D05
Daribha D04
Tanya D05

6 rows in set (0.03 sec)

Note: The BETWEEN operator defines the range of values in which the column value must fall into, to make the condition true.

Activity 9.8

Compare the output produced by the query in Example 9.6 and the output of the following query and differentiate between the OR and AND operators.

Example 9.7 The following query selects details of all the employees who work in the departments having deptid D01, D02 or D04.

mysql> SELECT *
$\qquad$ -> FROM EMPLOYEE
$\qquad$ -> WHERE DeptId = ‘D01’ OR DeptId = ‘D02’ OR
DeptId = ‘D04’;

EmpNo EName Salary Bonus DeptId
101 Aaliya 10000 234 D02
102 Kritika 60000 123 D01
103 Shabbir 45000 566 D01
104 Gurpreet 19000 565 D04
106 Sanya 48000 695 D02
107 Vergese 15000 NULL D01
109 Daribha 42000 NULL D04

7 rows in set (0.00 sec)

(E) Membership operator IN

The IN operator compares a value with a set of values and returns true if the value belongs to that set. The above query can be rewritten using IN operator as shown below:

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> WHERE DeptId IN (‘D01’, ‘D02’ , ‘D04’);

EmpNo EName Salary Bonus DeptId
101 Aaliya 10000 234 D02
102 Kritika 60000 123 D01
103 Shabbir 45000 566 D01
104 Gurpreet 19000 565 D04
106 Sanya 48000 695 D02
107 Vergese 15000 NULL D01
109 Daribha 42000 NULL D04

7 rows in set (0.00 sec)

Example 9.8 The following query selects details of all the employees except those working in department number D01 or D02.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> WHERE DeptId NOT IN(‘D01’, ‘D02’);

EmpNo EName Salary Bonus DeptId
104 Gurpreet 19000 565 D04
105 Joseph 34000 875 D03
108 Nachaobi 29000 NULL D05
109 Daribha 42000 NULL D04
110 Tanya 50000 467 D05

5 rows in set (0.00 sec)

Note: Here we need to combine NOT with IN as we want to retrieve all records except with DeptId D01 and D02.

(F) ORDER BY Clause

ORDER BY clause is used to display data in an ordered form with respect to a specified column. By default, ORDER BY displays records in ascending order of the specified column’s values. To display the records in descending order, the DESC (means descending) keyword needs to be written with that column.

Example 9.9 The following query selects details of all the employees in ascending order of their salaries.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> ORDER BY Salary;

EmpNo EName Salary Bonus DeptId
101 Aaliya 10000 234 D02
107 Vergese 15000 NULL D01
104 Gurpreet 19000 565 D04
108 Nachaobi 29000 NULL D05
105 Joseph 34000 875 D03
109 Daribha 42000 NULL D04
103 Shabbir 45000 566 D01
106 Sanya 48000 695 D02
110 Tanya 50000 467 D05
102 Kritika 60000 123 D01

10 rows in set (0.05 sec)

Example 9.10 Select details of all the employees in descending order of their salaries.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> ORDER BY Salary DESC;

EmpNo EName Salary Bonus DeptId
102 Kritika 60000 123 D01
110 Tanya 50000 467 D05
106 Sanya 48000 695 D02
103 Shabbir 45000 566 D01
109 Daribha 42000 NULL D04
105 Joseph 34000 875 D03
108 Nachaobi 29000 NULL D05
104 Gurpreet 19000 565 D04
107 Vergese 15000 NULL D01
101 Aaliya 10000 234 D02

10 rows in set (0.00 sec)

Activity 9.9

Execute the following 2 queries and find out what will happen if we specify two columns in the ORDER BY clause:

SELECT * FROM
EMPLOYEE
ORDER BY Salary,
Bonus;

SELECT * FROM EMPLOYEE
ORDER BY
Sal ary, Bonus
DESC;

(G) Handling NULL Values

SQL supports a special value called NULL to represent a missing or unknown value. For example, the Gphone column in the GUARDIAN table can have missing value for certain records. Hence, NULL is used to represent such unknown values. It is important to note that NULL is different from 0 (zero). Also, any arithmetic operation performed with NULL value gives NULL. For example: $5+$ NULL = NULL because NULL is unknown hence the result is also unknown. In order to check for NULL value in a column, we use IS NULL operator.

Example 9.11 The following query selects details of all those employees who have not been given a bonus. This implies that the bonus column will be blank.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> WHERE Bonus IS NULL;

EmpNo Ename Salary Bonus DeptId
107 Vergese 15000 NULL D01
108 Nachaobi 29000 NULL D05
109 Daribha 42000 NULL D04

3 rows in set (0.00 sec)

Example 9.12 The following query selects names of all employees who have been given a bonus (i.e., Bonus is not null) and works in the department D01.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> WHERE Bonus IS NULL;

EName
Kritika
Shabbir

2 rows in set (0.00 sec)

(H) Substring pattern matching

Many a times we come across situations where we do not want to query by matching exact text or value. Rather, we are interested to find matching of only a few characters or values in column values. For example, to find out names starting with “T” or to find out pin codes starting with ‘60’. This is called substring pattern matching. We cannot match such patterns using $=$ operator as we are not looking for an exact match. SQL provides a LIKE operator that can be used with the WHERE clause to search for a specified pattern in a column.

The LIKE operator makes use of the following two wild card characters:

  • % (per cent)- used to represent zero, one, or multiple characters
  • _ (underscore)- used to represent exactly a single character

Example 9.13 The following query selects details of all those employees whose name starts with ’ $\mathrm{K}$ ‘.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> WHERE Ename like ‘K%’;

EmpNo Ename Salary Bonus DeptId
102 Kritika 60000 123 D01

1 row in set (0.00 sec)

Example 9.14 The following query selects details of all those employees whose name ends with ‘a’, and gets a salary more than 45000.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> WHERE Ename like ‘%a’
$\qquad$ -> AND Salary > 45000;

EmpNo Ename Salary Bonus DeptId
102 Kritika 60000 123 D01
106 Sanya 48000 695 D02
110 Tanya 50000 467 D05

3 rows in set (0.00 sec)

Think and Reflect

When we type first letter of a contact name in our contact list in our mobile phones all the names containing that character are displayed. Can you relate SQL statement with the process? List other real-life situations where you can visualise a SQL statement in operation.

Example 9.15 The following query selects details of all those employees whose name consists of exactly 5 letters and starts with any letter but has ‘ANYA’ after that.

mysql> SELECT * FROM EMPLOYEE
$\qquad$ -> WHERE Ename like ‘_ANYA’;

EmpNo Ename Salary Bonus DeptId
106 Sanya 48000 695 D02
110 Tanya 50000 467 D05

2 rows in set (0.00 sec)

Example 9.16 The following query selects names of all employees containing ‘se’ as a substring in name.

mysql> SELECT Ename FROM EMPLOYEE
$\qquad$ -> WHERE Ename like ‘%se%’;

Ename
Joseph
Vergese

2 rows in set (0.00 sec)

Example 9.17 The following query selects names of all employees containing ‘a’ as the second character.

_mysql> SELECT EName FROM EMPLOYEE
$\qquad$ -> WHERE Ename like ‘a%’;

EName
Aaliya
Sanya
Nachaobi
Daribha
Tanya

5 rows in set (0.00 sec)

9.7 DATA UPDATION AND DELETION

Updation and deletion of data are also part of SQL Data Manipulation Language (DML). In this section, we are going to apply these two data manipulation methods on the StudentAttendance database given in section 9.4.

9.7.1 Data Updation

We may need to make changes in the value(s) of one or more columns of existing records in a table. For example, we may require some changes in address, phone number or spelling of name, etc. The UPDATE statement is used to make such modifications in existing data.

Syntax:

UPDATE table_name
SET attribute1 = value1, attribute2 = value2, …
WHERE condition;

STUDENT Table 9.7 has NULL value in GUID for the student with roll number 3. Suppose students with roll numbers 3 and 5 are siblings. Then, in the STUDENT table, we need to fill the GUID value for the student with roll number 3 as 101010101010. In order to update or change GUID of a particular row (record), we need to specify that record using WHERE clause, as shown below:

mysql> UPDATE STUDENT
$\qquad$ -> SET GUID = 101010101010
$\qquad$ -> WHERE RollNumber = 3;
Query OK, 1 row affected (0.06 sec) Rows matched: 1
Changed: 1 Warnings: 0

We can then verify the updated data using the statement SELECT * FROM STUDENT.

Caution : If we miss the where clause in the UPDATE statement then the GUID of all the records will be changed to 101010101010.

We can also update values for more than one column using the UPDATE statement. Suppose, the guardian with GUID 466444444666 has requested to change Address to ‘WZ - 68, Azad Avenue, Bijnour, MP’ and Phone number to ‘4817362092’.

mysql> UPDATE GUARDIAN
$\qquad$ -> SET GAddress = ‘WZ - 68, Azad Avenue,
-> Bijnour, MP’, GPhone = 9010810547
$\qquad$ -> WHERE GUID = 466444444666;
Query OK, 1 row affected (0.06 sec)
Rows matched: 1 Changed: 1 Warnings: 0

mysql> SELECT * FROM GUARDIAN ;

GUID GName Gphone GAddress
444444444444
111111111111
101010101010
333333333333
466444444666
Amit Ahuja
Baichung Bhutia
Himanshu Shah
Danny Dsouza
Sujata P.
5711492685
3612967082
4726309212
NULL
3801923168
G-35, Ashok vihar, Delhi
Flat no. 5, Darjeeling Appt., Shimla
26/77, West Patel Nagar, Ahmedabad
S -13, Ashok Village, Daman
WZ - 68, Azad Avenue, Bijnour, MP

5 rows in set (0.00 sec)

9.7.2 Data Deletion

DELETE statement is used to delete/remove one or more records from a table.

Syntax:

DELETE FROM table_name
WHERE condition;

Suppose the student with roll number 2 has left the school. We can use the following MySQL statement to delete that record from the STUDENT table.

mysql> DELETE FROM STUDENT WHERE RollNumber = 2;
Query OK, 1 row affected (0.06 sec)

mysql> SELECT * FROM STUDENT ;

RollNumber SName SDateofBirth GUID
1
3
4
5
6
Atharv Ahuja
Taleem Shah
John Dsouza
Ali Shah
Manika P.
2003-05-15
2002-02-28
2003-08-18
2003-07-05
2002-03-10
444444444444
101010101010
333333333333
101010101010
466444444666

5 rows in set (0.00 sec)

Caution: Like UPDATE statement, we need to be careful to include the WHERE clause while using a DELETE statement to delete records in a table. Otherwise, all the records in the table will get deleted.

9.8 FUNCTIONS IN SQL

In this section, we will understand how to use single row functions, multiple row functions, group records based on some criteria, and working on multiple tables using SQL.

Figure 9.2: Schema diagram of database CARSHOWROOM

Let us create a database called CARSHOWROOM having the schema as shown in Figure 9.2 It has the following four relations:

1) INVENTORY: Stores name, price, model, year of manufacturing, and fuel type for each car in inventory of the showroom,
2) CUSTOMER: Stores customer id, name, address, phone number and email for each customer,
3) SALE: Stores the invoice number, car id, customer id, sale date, mode of payment, sales person’s employee id and selling price of the car sold,
4) EMPLOYEE: Stores employee id, name, date of birth, date of joining, designation and salary of each employee in the showroom.

The records of the four relations are shown in Tables 9.9, 9.10, 9.11, and 9.12, respectively.

Table 9.9 INVENTORY

mysql> SELECT * FROM INVENTORY;

CarId CarName Price Model YearManufacture Fueltype
D001
D002
B001
B002
E001
E002
S001
S002
Dzire
Dzire
Baleno
Baleno
EECO
EECO
SWIFT
SWIFT
58263.00
673112.00
567031.00
647858.00
355205.00
654914.00
514000.00
614000.00
LXI
VXI
Sigmal.2
Deltal.2
5 STR STD
CARE
LXI
VXI
2017
2018
2019
2018
2017
2018
2017
2018
Petrol
Petrol
Petrol
Petrol
CNG
CNG
Petrol
Petrol

8 rows in set (0.00 sec)

Table 9.10 CUSTOMER

mysql> SELECT * FROM CUSTOMER;

CustId CustName CustAdd Phone Email
C0001
C0002
C0003
C0004
Amit Shah
Rehnuma
Charvi Nayyar
Gurpreet
L-10, Pitampura
J-12, SAKET
10/9, FF, Rohini
A-10/2, SF, Mayur Vihar
4564587852
5527688761
6811635425
3511056125
amitsaha@gmailcom
jai@gmailcom
you@gmailcom
may@gmailcom

4 rows in set (0.00 sec)

Table 9.11 SALE

mysql> SELECT * FROM SALE;

InvoiceNo CarId CustId SaleDate PaymentMode EmpID SalePrice
I00001
I00002
I00003
I00004
I00005
I00006
D001
S001
S002
D002
E001
S002
C0001
C0002
C0004
C0001
C0003
C0002
2019-01-24
2018-12-12
2019-01-25
2018-10-15
2018-12-20
2019-01-30
Credit Card
Online
Cheque
Bank Finance
Credit Card
Bank Finance
E004
E001
E010
E007
E002
E007
613248.00
590321.00
604000.00
659982.00
369310.00
620214.00

6 rows in set (0.00 sec)

Table 9.12 EMPLOYEE

mysql> SELECT * FROM EMPLOYEE;

EmpID EmpName DOB DOJ Designation Salary
E001
E002
E003
E004
E006
E007
E010
Rushil
Sanjay
Zohar
Arpit
Sanjucta
Mayank
Rajkumar
1994-07-10
1990-03-12
1975-08-30
1989-06-06
1985-11-03
1993-04-03
1987-02-26
2017-12-12
2016-06-05
1999-01-08
2010-12-02
2012-07-01
2017-01-01
2013-10-23
Salesman
Salesman
Peon
Salesman
Receptionist
Salesman
Salesman
25550
33100
20000
39100
27350
27352
31111

7 rows in set (0.00 sec)

We know that a function is used to perform some particular task and it returns zero or more values as a result. Functions are useful while writing SQL queries also. Functions can be applied to work on single or multiple records (rows) of a table. Depending on their application in one or multiple rows, SQL functions are categorised as Single Row functions and Aggregate functions.

9.8.1 Single Row Functions

These are also known as Scalar functions. Single row functions are applied on a single value and return a single value. Figure 9.3 lists different single row functions under three categories - Numeric (Math), String, Date and Time.

Figure 9.3: Three categories of single-row functions in SQL

Math Functions accept numeric value as input and return a numeric value as a result. String Functions accept character value as input and return either character or numeric values as output. Date and Time functions accept date and time value as input and return numeric or string or Date and Time as output.

(A) Math Functions

Three commonly used numeric functions are POWER(), ROUND() and MOD(). Their usage along with syntax is given in Table 9.13.

$\hspace{4.5cm}$ Table 9.13 Math Functions

Function Description Example with output
POWER(X,Y)
can also be written as
POW(X,Y)
Calculates $\mathrm{X}$ to the power $\mathrm{Y}$. mysql > SELECT POWER $(2,3)$;
Output:
8
ROUND(N,D) Rounds off number $\mathrm{N}$ to $\mathrm{D}$
number of decimal places.
Note: If $\mathrm{D}=0$, then it rounds
off the number to the nearest
integer.
mysql >SELECT ROUND(2912.564, 1);
Output:
2912.6
mysqi> SELECT ROUND(283.2);
Output:
283
$\operatorname{MOD}(\mathrm{A}, \mathrm{B})$ Returns the remain
der after dividing number A by
number $B$.
mysql> SELECT MOD $(21,2)$;
Output:
1

Example 9.18 In order to increase sales, suppose the car dealer decides to offer his customers to pay the total amount in 10 easy EMIs (equal monthly instalments). Assume that EMIs are required to be in multiples of 10000. For that, the dealer wants to list the CarID and Price along with the following data from the Inventory table:

a) Calculate GST as 12 per cent of Price and display the result after rounding it off to one decimal place.

mysql> SELECT ROUND(12/100*Price,1) “GST” FROM INVENTORY;

GST
69913.6
80773.4
68043.7
77773.0
42624.6
78589.0
61680.0
73680.0

8 rows in set (0.00 sec)

Activity 9.10

Using the table SALE of CARSHOWROOM database, write SQL queries for the following:

a) Display the InvoiceNo and commission value rounded off to zero decimal places.

b) Display the details of SALE where payment mode is credit card.

b) Add a new column FinalPrice to the table inventory which will have the value as sum of Price and 12 per cent of the GST.

mysql> ALTER TABLE INVENTORY ADD(FinalPrice
Numeric(10,1));
Query OK, 8 rows affected (0.03 sec)
Records: 8 Duplicates: 0 Warnings: 0

mysql> UPDATE INVENTORY SET
FinalPrice=Price+Round(Price*12/100,1);
Query OK, 8 rows affected (0.01 sec)
Rows matched: 8 Changed: 8 Warnings: 0

mysql > SELECT * FROM I NVENTORY;

Carld CarName Price Model I Year Manufacture Fuel Type Final Price
D0O1 Dzire 582613.00 LXI 2017 Petrol 652526.6
D002 Dzire 673112.00 VXI 2018 Petrol 753885.4
B001 Bal eno 567031.00 Si g ma 1.2 2019 Petrol 635074.7
B002 Bal eno 647858.00 Delta 1.2 2018 Petrol 725601.0
E0O1 EECO 355205.00 5 STR STD 2017 $C N G$ 397829.6
E002 EECO 654914.00 CARE 2018 CNG 733503.7
5001 SWI F T 514000.00 LXI 2017 Petrol 575680.0
SOO2 SWI F T 614000.00 VXI 2018 Petrol 687680.0

8 rows in set (0.00 sec)

c) Calculate and display the amount to be paid each month (in multiples of 1000) which is to be calculated after dividing the FinalPrice of the car into 10 instalments.

d) After dividing the amount into EMIs, find out the remaining amount to be paid immediately, by performing modular division.

Following SQL query can be used to solve the above mentioned (c) and (d) problem:

mysql> SELECT CarId, FinalPrice, ROUND(FinalPriceMOD (FinalPrice,1000)/10,0) “EMI”,
MOD(FinalPrice,10000) “Remaining Amount” FROM INVENTORY;

CarId Final Price E MI Remaining Amount
D001
D002
B001
B002
E001
E002
S001
S002
652526.6
753885.4
635074.7
725601.0
397829.6
733503.7
575680.0
687680.0
652474
753797
635067
725541
397747
733453
575612
687612
2526.6
3885.4
5074.7
5601.0
7829.6
3503.7
5680.0
7680.0

Example 9.19

a) Let us now add a new column Commission to the SALE table. The column Commission should have a total length of 7 in which 2 decimal places to be there.

mysql> ALTER TABLE SALE ADD(Commission
Numeric(7,2));
Query OK, 6 rows affected (0.34 sec)
Records: 6 Duplicates: 0 Warnings: 0

b) Let us now calculate commission for sales agents as $12 %$ of the SalePrice, Insert the values to the newly added column Commission and then display records of the table SALE where commission >73000.

mysql> UPDATE SALE SET
Commission=12/100*SalePrice;
Query OK, 6 rows affected (0.06 sec)
Rows matched: 6 Changed: 6 Warnings: 0

mysql> SELECT * FROM SALE WHERE Commission > 73000;

invoiceno carid custid saledate paymentmode empid saleprice Commission
I00001
I00004
I00006
D001
D002
D003
C0001
C000
1 C0002
2019-01-24
2018-10-15
2019-01-30
Credit Card
Bank Finance
Bank Finance
E004
E007
E007
613248.00
659982.00
620214.00
73589.64
79198.84
74425.68

3 rows in set (0.02 sec)

c) Display InvoiceNo, SalePrice and Commission such that commission value is rounded off to 0 .

mysql> SELECT InvoiceNo, SalePrice,
Round(Commission,0) FROM SALE;

InvoiceNo SalePrice Round(Commission,0)
I00001
I00002
I00003
I00004
I00005
I00006
613248.00
590321.00
604000.00
659982.00
369310.00
620214.00
73590
70839
72480
79198
44317
74426

6 rows in set (0.00 sec)

(B) String Functions

String functions can perform various operations on alphanumeric data which are stored in a table. They can be used to change the case (uppercase to lowercase or vice-versa), extract a substring, calculate the length of a string and so on. String functions and their usage are shown in Table 9.14.

Activity 9.11

Using the table INVENTORY from CARSHOWROOM database, write sql queries for the following:

a) Convert the CarMake to uppercase if its value starts with the letter ’ B ‘.

b) If the length of the car’s model is greater than 4 then fetch the substring starting from position 3 till the end from attribute Model.

$\hspace{4cm}$ Table 9.14 String Functions


Activity 9.12

Using the table EMPLOYEE from CARSHOWROOM database, write SQL queries for the following:

a) Display employee name and the last 2 characters of his EmpId.

b) Display designation of employee and the position of character ’ $\mathrm{e}$ ’ in designation, if present.

Example 9.20 Let us use Customer relation shown in Table 9.10 to understand the working of string functions.

a) Display customer name in lower case and customer email in upper case from table CUSTOMER.

mysql> SELECT LOWER(CustName), UPPER(Email) FROM CUSTOMER;

LOWER(CustName) UPPER(Email)
amit shah
rehnuma
charvi nayyar
gurpreet
AMITSAHA2@GMAILCOM
REHNUMA@HOTMAILCOM
CHARVI123@YAHOOCOM
GUR_SINGH@YAHOOCOM

4 rows in set (0.00 sec)

b) Display the length of the email and part of the email from the email id before the character ’ $a$ ‘. Note - Do not print ‘@).

mysql > SELECT LENGTH(Email), LEFT(Email, I NSTR(Email, “@” )-1) FROM CUSTOMER;

LENGTH(Email) LEFT(Email, INSTR(Email, “@”)-1)
19
19
19
19
amitsaha2
rehnuma
charvi123
gur_singh

4 rows in set (0.03 sec)

The function INSTR will return the position of " $@$ " in the email address. So, to print email id without “@” we have to use position -1 .

Activity 9.13

Using the table EMPLOYEE of CARSHOWROOM database, list the day of birth for all employees whose salary is more than 25000.

c) Let us assume that four-digit area code is reflected in the mobile number starting from position number 3 . For example, 1851 is the area code of mobile number 9818511338. Now, write the SQL query to display the area code of the customer living in Rohini.

mysql> SELECT MID(Phone,3,4) FROM CUSTOMER WHERE CustAdd like ‘%Rohini%’;

MID(Phone,3,4)
1163

1 row in set (0.00 sec)

Think and Reflect

Can we use arithmetic operators $\left(+,-.{ }^{*}\right.$, or /) on date functions?

d) Display emails after removing the domain name extension “.com” from emails of the customers.

mysql> SELECT TRIM( “. com” from Email) FROM CUSTOMER;

TRIM(".com” FROM Email)
amitsaha2@gmail
rehnuma@hotmail
charvi123@yahoo
gur_singh@yahoo

4 rows in set (0.00 sec)

e) Display details of all the customers having yahoo emails only.

mysql> SELECT * FROM CUSTOMER WHERE Email LIKE “%yahoo%”;

CustID CustName CustAdd Phone Email
C0003
C0004
Charvi Nayyar
Gurpreet
10/9, FF, Rohini
A-10/2, SF, Mayur Vihar
6811635425
3511056125
charvi123@yahoocom
gur_singh@yahoocom

2 rows in set (0.00 sec)

(C) Date and Time Functions

There are various functions that are used to perform operations on date and time data. Some of the operations include displaying the current date, extracting each element of a date (day, month and year), displaying day of the week and so on. Table 9.15 explains various date and time functions.

$\hspace{4.5cm}$ Table 9.15 Date Functions

Function Description Example with output
NOW() It returns the current system date
and time.
mysql> SELECT NOW();
Output:
2019-07-11 19:41:17
DATE() It returns the date part from the
given date/time expression.
mysql> SELECT DATE(NOW());
Output:
2019-07-11
MONTH(date) It returns the month in numeric
form from the date.
mysql > SELECT MONTH(NOW( ));
Output:
7
MONTHNAME(date) It returns the month name from
the specified date.
mysqI > SELECT
MONTHNAME(“2003-11-28”);
Output:
November
YEAR(date) It returns the year from the date. mysql> SELECT YEAR(“2003-10-
03 “) :
Output:
2003
DAY(date) It returns the day part from the
date.
mysql> SELECT DAY(“2003-03-
24 “) :
Output:
24
DAYNAME(date) It returns the name of the day
from the date.
mysqI > SELECT
DAYNAME(“2019-07-11”);
Output:
Thursday

Example 9.21 Let us use the EMPLOYEE table of CARSHOWROOM database to illustrate the working of some of the date and time functions.

a) Select the day, month number and year of joining of all employees.

mysql> SELECT DAY(DOJ), MONTH(DOJ), YEAR(DOJ) FROM EMPLOYEE;

DAY(DOJ) MONTH(DOJ) YEAR(DOJ)
12
5
8
2
1
1
23
12
6
1
12
7
1
10
2017
2016
1999
2010
2012
2017
2013

7 rows in set (0.03 sec)

Activity 9.14

a) Find sum of Sale Price of the cars purchased by the customer having ID C0001 from table SALE.

b) Find the maximum and minimum commission from the SALE table.

b) If the date of joining is not a Sunday, then display it in the following format “Wednesday, 26, November, 1979.”

DAYNAME ( DOJ) DAY (DOJ) MONT HNAME (DOJ ) YEAR(DOJ)
Tuesday
Friday
Thursday
Wednesday
12
8
2
23
December
January
December
October
2017
1999
2010
2013

9.8.2 Aggregate Functions

Aggregate functions are also called Multiple Row functions. These functions work on a set of records as a whole and return a single value for each column of the records on which the function is applied. Table 9.16 shows the differences between single row functions and multiple row functions. Table 9.17 describes some of the aggregate functions along with their usage. Note that column must be of numeric type.

$\hspace{1.5cm}$ Table 9.16 Differences between Single and Multiple Row Functions

Single Row Function Multiple row function
1. It operates on a single row at a time.
2. It returns one result per row.
3. It can be used in Select, Where, and Order by
clause.
4. Math, String and Date functions are examples
of single row functions.
1. It operates on groups of rows.
2. It returns one result for a group of rows.
3. It can be used in the select clause only.
4. Max(0, Min(0, Avg(0, Sum(), Count() and
Count(*) are examples of multiple row
functions.

$\hspace{3cm}$ Table 9.17 Aggregate Functions in SQL


Example 9.22

a) Display the total number of records from table INVENTORY having a model as VXI.

mysql> SELECT COUNT(*) FROM INVENTORY WHERE
Model=”VXI”;

COUNT(*)
$\hspace{2cm}$ 2

1 row in set (0.00 sec)

b) Display the total number of different types of Models available from table INVENTORY.

mysqI > SELECT COUNT(DISTINCT Model) FROM INVENTORY;

COUNT(DISTINCT MODEL)
$\hspace{3cm}$ 6

1 row in set (0.09 sec)

c) Display the average price of all the cars with Model LXI from table INVENTORY.

mysql> SELECT AVG(Price) FROM INVENTORY WHERE
Model=“LXI”;

AVG(Price)
548306.500000

1 row in set (0.03 sec)

Activity 9.15

a) List the total number of cars sold by each employee.

b) List the maximum sale made by each employee.

9.9 GROUP BY CLAUSE IN SQL

At times we need to fetch a group of rows on the basis of common values in a column. This can be done using a group by clause. It groups the rows together that contains the same values in a specified column. We can use the aggregate functions (COUNT, MAX, MIN, AVG and SUM) to work on the grouped values. HAVING Clause in SQL is used to specify conditions on the rows with Group By clause.

Consider the SALE table from the CARSHOWROOM database:

mysql> SELECT * FROM SALE;

InvoiceNo CarId CustId SaleDate PaymentMode EmpID SalePrice Commission
I00001
I00002
I00003
I00004
I00005
I00006
D001
S001
S002
D002
E001
S002
C0001
C0002
C0004
C0001
C0003
C0002
2019-01-24
2018-12-12
2019-01-25
2018-10-15
2018-12-20
2019-01-30
Credit Card
Online
Cheque
Bank Finance
Credit Card
Bank Finance
E004
E001
E010
E007
E002
E007
613248.00
590321.00
604000.00
659982.00
369310.00
620214.00
73589.64
70838.52
72480.00
79198.84
44318.20
74425.68

6 rows in set (0.11 sec)

CarID, CustID, SaleDate, PaymentMode, EmpID, SalePrice are the columns that can have rows with the same values in it. So, Group by clause can be used in these columns to find the number of records of a particular type (column), or to calculate the sum of the price of each car type.

Example 9.23

a) Display the number of Cars purchased by each Customer from SALE table.

mysql> SELECT CustID, COUNT(*) “Number of Cars” FROM SALE GROUP BY CustID;

CustID Number of Cars
C0001
C0002
C0003
C0004
2
2
1
1

4 rows in set (0.00 sec)

b) Display the Customer Id and number of cars purchased if the customer purchased more than 1 car from SALE table.

mysql> SELECT CustID, COUNT() FROM SALE GROUP BY
CustID HAVING Count(
)>1;

CustID COUNT(*)
C0001
C0002
2
2

2 rows in set (0.30 sec)

c) Display the number of people in each category of payment mode from the table SALE.

mysql> SELECT PaymentMode, COUNT(PaymentMode)
FROM SALE GROUP BY Paymentmode ORDER BY
Paymentmode;

PaymentMode Count(PaymentMode)
Bank Finance
Cheque
Credit Card
Online
2
1
2
1

4 rows in set (0.00 sec)

d) Display the PaymentMode and number of payments made using that mode more than once.

mysql> SELECT PaymentMode, Count(PaymentMode)
FROM SALE GROUP BY Paymentmode HAVING COUNT(*)>1
ORDER BY Paymentmode;

PaymentMode Count(PaymentMode)
Bank Finance
Credit Card
2
2

2 rows in set (0.00 sec)

9.10 OPERATIONS ON RELATIONS

We can perform certain operations on relations like Union, Intersection and Set Difference to merge the tuples of two tables. These three operations are binary operations as they work upon two tables. Note here that these operations can only be applied if both the relations have the same number of attributes and corresponding attributes in both tables have the same domain.

9.10.1 UNION ( $\cup)$

This operation is used to combine the selected rows of two tables at a time. If some rows are same in both the tables, then result of the Union operation will show those rows only once. Figure 9.4 shows union of two sets.

Figure 9.4: Union of two sets

Let us consider two relations DANCE and MUSIC shown in Tables 9.18 and 9.19 respectively.

Table 9.18 DANCE

SNo Name Class
1 Aastha 7 A
2 Mahira 6 A
3 Mohit 7 B
4 Sanjay 7 A

Table 9.19 MUSIC

SNo Name Class
1 Mehak 8A
2 Mahira 6A
3 Lavanya 7A
4 Sanjay 7A
5 Abhay 8A

If we need the list of students participating in either of events, then we have to apply UNION operation (represented by symbol $U$ ) on relations DANCE and MUSIC. The output of UNION operation is shown in

Table 9.20 DANCE $\cup$ MUSIC

SNo Name Class
1 Aastha 7A
2 Mahira 6A
3 Mohit 7B
4 Sanjay 7A
1 Mehak 8A
3 Lavanya 7A
5 Abhay 8A

9.10.2 INTERSECT ( $\cap$ )

Intersect operation is used to get the common tuples from two tables and is represented by symbol $\cap$. Figure 9.5 shows intersection of two sets.

Figure 9.5: Intersection of two sets

Suppose, we have to display the list of students who are participating in both the events (DANCE and MUSIC), then intersection operation is to be applied on these two tables. The output of INTERSECT operation is shown in Table 9.21.

Table 9.21 DANCE $\cap$ MUSIC

SNo Nmae Class
2
4
Mahira
Sanjay
6A
7A

9.10.3 MINUS (-)

This operation is used to get tuples/rows which are in the first table but not in the second table and the operation is represented by the symbol - (minus). Figure 9.6 shows minus operation (also called set difference) between two sets.

Figure 9.6: Difference of two sets

Suppose we want the list of students who are only participating in MUSIC and not in DANCE event. Then, we will use the MINUS operation, whose output is given in Table 9.22.

Table 9.22 DANCE - MUSIC

SNo Name Class
1 Mehak 8A
3 Lavanya 7A
5 Abhay 8

9.10.4 Cartesian Product (X)

Cartesian product operation combines tuples from two relations. It results in all pairs of rows from the two input relations, regardless of whether or not they have the same values on common attributes. It is denoted as ’ $\mathrm{X}$ ‘.

The degree of the resulting relation is calculated as the sum of the degrees of both the relations under consideration. The cardinality of the resulting relation is calculated as the product of the cardinality of relations on which cartesian product is applied. Let us use the relations DANCE and MUSIC to show the output of cartesian product. Note that both relations are of degree 3. The cardinality of relations DANCE and MUSIC is 4 and 5 respectively. Applying cartesian product on these two relations will result in a relation of degree 6 and cardinality 20, as shown in Table 9.23.

Table 9.23 DANCE X MUSIC

SNo Name Class SNo Name Class
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
Aastha
Mahira
Mohit
Sanjay
Aastha
Mahira
Mohit
Sanjay
Aastha
Mahira
Mohit
Sanjay
Aastha
Mahira
Mohit
Sanjay
Aastha
Mahira
Mohit
Sanjay
7A
6A
7B
7A
7A
6A
7B
7A
7A
6A
7A
7A
7A
6A
7A
7A
7A
6A
7B
7A
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
Mekak
Mekak
Mekak
Mekak
Mahira
Mahira
Mahira
Mahira
Lavanya
Lavanya
Lavanya
Lavanya
Sanjay
Sanjay
Sanjay
Sanjay
Abhay
Abhay
Abhay
Abhay
8A
8A
8A
8A
6A
6A
6A
6A
7A
7A
7A
7A
7A
7A
7A
7A
8A
8A
8A
8A

20 rows in set (0.03 sec)

9.11 USING TWO RELATIONS IN A QUERY

Till now we have written queries in SQL using a single relation only. In this section, we will learn to write queries using two relations.

9.11.1 Cartesian product on two tables

From the previous section, we learnt that application of operator cartesian product on two tables results in a table having all combinations of tuples from the underlying tables. When more than one table is to be used in a query, then we must specify the table names by separating commas in the FROM clause, as shown in Example 9.24. On execution of such a query, the DBMS (MySql) will first apply cartesian product on specified tables to have a single table. The following query of example 9.24 applies cartesian product on the two tables DANCE and MUSIC:

Example 9.24

a) Display all possible combinations of tuples of relations DANCE and MUSIC

mysql > SELECT * FROM DANCE, MUSIC;

As we are using SELECT * in the query, the output will be the Table 9.23 having degree 6 and cardinality 20 .

b) From the all possible combinations of tuples of relations DANCE and MUSIC display only those rows such that the attribute name in both have the same value.

mysqI>SELECT * FROM DANCE $D$, MUSIC M WHERE
D. Name = M. Name;

Table 9.24 Tuples with same name

SNo Nmae Class Sno Name Class
2
4
Mahira
Sanjay
6A
7A
2
4
Mahira
Sanjay
6A
7A

Note that in this query we have used table aliases (D for DANCE and M for MUSIC), just like column aliases (see Section 9.6.2) to refer to tables by shortened names. It is important to note that table alias is valid only for current query and the original table name cannot be used in the query if its alias is given in FROM clause.

9.11.2 JOIN on two tables

JOIN operation combines tuples from two tables on specified conditions. This is unlike cartesian product which make all possible combinations of tuples. While using the JOIN clause of SQL, we specify conditions on the related attributes of two tables within the FROM clause. Usually, such an attribute is the primary key in one table and foreign key in another table. Let us create two tables UNIFORM (UCode, UName, UColor) and COST (UCode, Size, Price) in the SchoolUniform database. UCode is Primary Key in table UNIFORM. UCode and Size is the Composite Key in table COST. Therefore, Ucode is a common attribute between the two tables which can be used to fetch the common data from both tables. Hence, we need to define Ucode as foreign key in the Price table while creating this table.

Table 9.25 Uniform table

Ucode Uname Ucolor
1
2
3
Shirt
Pant
Tie
White
Grey
Blue

Table 9.26 Cost table

Ucode $\mathrm{Size}$ Price
1 L 580
1 $M$ 500
2 L 890
2 M 810

Example 9.25 List the UCode, UName, UColor, Size and Price of related tuples of tables UNIFORM and COST.

The given query may be written in three different ways as given below.

a) Using condition in where clause

mysql>SELECT * FROM UNIFORM U, COST C WHERE
U. UCode = C. UCode;

Table 9.27 Output of the query

UCode UName UColor Size Price
1 Shirt White L 580
1 Shirt White M 500
2 Pant Grey L 890
2 Pant Grey M 810

4 rows in set (0.08 sec)

As the attribute Ucode is in both tables, we need to use table alias to remove ambiguity. Hence, we have used qualifier with attribute UCode in SELECT and FROM clauses to indicate its scope.

b) Explicit use of JOIN clause

mysql> SELECT * FROM UNIFORM U JOI N COST C ON U. Ucode $=$ C. Ucode;

The output of the query is same as shown in Table 9.26. In this query we have used JOIN clause explicitly along with condition in From clause. Hence no condition needs to be given in where clause.

c) Explicit use of NATURAL JOIN clause

The output of queries (a) and (b) shown in Table 9.26 has a repetitive column Ucode having exactly the same values. This redundant column provides no additional information. There is an extension of JOIN operation called NATURAL JOIN which works similar to JOIN clause in SQL but removes the redundant attribute. This operator can be used to join the contents of two tables if there is one common attribute in both the tables. The above SQL query using NATURAL JOIN is shown below:

mysql> SELECT * FROM UNIFORM NATURAL JOIN COST;

UCode UName UColor Size Price
1 Shirt White L 580
1 Shirt White M 500
2 Pant Grey L 890
2 Pant Grey M 810

4 rows in set (0.17 sec)

It is clear from the output that the result of this query is same as that of queries written in (a) and (b) except that the attribute Ucode appears only once.

Following are some of the points to be considered while applying JOIN operations on two or more relations:

  • If two tables are to be joined on equality condition on the common attribute, then one may use JOIN with ON clause or NATURAL JOIN in FROM clause. If three tables are to be joined on equality condition, then two JOIN or NATURAL JOIN are required.
  • In general, $\mathrm{N}-1$ joins are needed to combine $\mathrm{N}$ tables on equality condition.
  • With JOIN clause, we may use any relational operators to combine tuples of two tables.

SUMMARY

  • Database is a collection of related tables. MySQL is a ‘relational’ DBMS.
  • DDL (Data Definition Language) includes SQL statements such as, Create table, Alter table and Drop table.
  • DML (Data Manipulation Language) includes SQL statements such as, insert, select, update and delete.
  • A table is a collection of rows and columns, where each row is a record and columns describe the feature of records.
  • ALTER TABLE statement is used to make changes in the structure of a table like adding, removing or changing datatype of column(s).
  • UPDATE statement is used to modify existing data in a table.
  • WHERE clause in SQL query is used to enforce condition(s).
  • DISTINCT clause is used to eliminate repetition and display the values only once.
  • The BETWEEN operator defines the range of values inclusive of boundary values.
  • The IN operator selects values that match any value in the given list of values.
  • NULL values can be tested using IS NULL and IS NOT NULL.
  • ORDER BY clause is used to display the result of a SQL query in ascending or descending order with respect to specified attribute values. By default, the order is ascending.
  • LIKE operator is used for pattern matching. % and _ are two wild card characters. The per cent (%) symbol is used to represent zero or more characters. The underscore $\left(_\right)$symbol is used to represent a single character.
  • A Function is used to perform a particular task and return a value as a result.
  • Single Row functions work on a single row of the table and return a single value.
  • Multiple Row functions work on a set of records as a whole and return a single value. Examples include COUNT, MAX, MIN, AVG and SUM.
  • GROUP BY function is used to group rows of a table that contain the same values in a specified column.
  • Join is an operation which is used to combine rows from two or more tables based on one or more common fields between them.

EXERCISE

1. Answer the following questions:

a) Define RDBMS. Name any two RDBMS software.
b) What is the purpose of the following clauses in a select statement?
$\quad$ i) ORDER BY
$\quad$ ii) GROUP BY
c) Site any two differences between Single Row Functions and Aggregate Functions.
d) What do you understand by Cartesian Product?
e) Differentiate between the following statements:
$\quad$ i) ALTER and UPDATE
$\quad$ ii) DELETE and DROP
f) Write the name of the functions to perform the following operations:
$\quad$ i) To display the day like “Monday”, “Tuesday”, from the date when India got independence.
$\quad$ ii) To display the specified number of characters from a particular position of the given string.
$\quad$ iii) To display the name of the month in which you were born.
$\quad$ iv) To display your name in capital letters.

2. Write the output produced by the following SQL statements:

a) SELECT POW $(2,3)$;
b) SELECT ROUND(342.9234,-1);
c) SELECT LENGTH(“Informatics Practices”);
d) SELECT $\hspace{2cm}$ YEAR(“1979/11/26”),
MONTH(“1979/11/26”), $\hspace{2cm}$ DAY(“1979/11/26”),
MONTHNAME(“1979/11/26”);
e) SELECT $\quad$ LEFT(“INDIA”,3), $\quad$ RIGHT(“Computer Science”,4),
MID(“Informatics”,3,4), $\quad$ SUBSTR(“Practices”,3);

3. Consider the following MOVIE table and write the SQL queries based on it.

MovieID MovieName Category ReleaseDate ProductionCost
BusinessCost
001 Hindi_Movie Musica1 2018-04-23 124500 130000
002 Tamil_Movie Action 2016-05-17 112000 118000
003 English_Movie Horror 2017-08-06 245000 360000
004 Bengali_Movie Adventure 2017-01-04 72000 100000
005 Telugu_Movie Action - 100000 -
006 Punjabi_Movie Comedy - 30500 -

a) Display all the information from the Movie table.
b) List business done by the movies showing only MovieID, MovieName and Total_Earning. Total_ Earning to be calculated as the sum of ProductionCost and BusinessCost.
c) List the different categories of movies.
d) Find the net profit of each movie showing its MovieID, MovieName and NetProfit. Net Profit is to be calculated as the difference between Business Cost and Production Cost.
e) List MovieID, MovieName and Cost for all movies with ProductionCost greater than 10,000 and less than $1,00,000$.
f) List details of all movies which fall in the category of comedy or action.
g) List details of all movies which have not been released yet.

4. Suppose your school management has decided to conduct cricket matches between students of Class XI and Class XII. Students of each class are asked to join any one of the four teams - Team Titan, Team Rockers, Team Magnet and Team Hurricane. During summer vacations, various matches will be conducted between these teams. Help your sports teacher to do the following:

a) Create a database “Sports”.
b) Create a table “TEAM” with following considerations:
$\quad$ i) It should have a column TeamID for storing an integer value between 1 to 9 , which refers to unique identification of a team.
$\quad$ ii) Each TeamID should have its associated name (TeamName), which should be a string of length not less than 10 characters.
c) Using table level constraint, make TeamID as the primary key.
d) Show the structure of the table TEAM using a SQL statement.
e) As per the preferences of the students four teams were formed as given below. Insert these four rows in TEAM table:

$\quad$ Row 1: (1, Team Titan)
$\quad$ Row 2: (2, Team Rockers)
$\quad$ Row 3: (3, Team Magnet)
$\quad$ Row 3: (4, Team Hurricane)

f) Show the contents of the table TEAM using a DML statement.
g) Now create another table MATCH_DETAILS and insert data as shown below. Choose appropriate data types and constraints for each attribute.

Table: MATCH_DETAILS

MatchID $\quad$ MatchDate FirstTeamID SecondTeamID FirstTeamScore SecondTeamScore
M1 2018-07-17 $\qquad$ 1 $\qquad$ 2 $\qquad$ 90 $\qquad$ 86
M2 2018-07-18 $\qquad$ 3 $\qquad$ 4 $\qquad$ 45 $\qquad$ 48
M3 2018-07-19 $\qquad$ 1 $\qquad$ 3 $\qquad$ 78 $\qquad$ 56
M4 2018-07-19 $\qquad$ 2 $\qquad$ 4 $\qquad$ 56 $\qquad$ 67
M5 2018-07-18 $\qquad$ 1 $\qquad$ 4 $\qquad$ 32 $\qquad$ 87
M6 2018-07-17 $\qquad$ 2 $\qquad$ 3 $\qquad$ 67 $\qquad$ 51

5. Using the sports database containing two relations (TEAM, MATCH_DETAILS) and write the queries for the following:

a) Display the MatchID of all those matches where both the teams have scored more than 70 .
b) Display the MatchID of all those matches where FirstTeam has scored less than 70 but SecondTeam has scored more than 70.
c) Display the MatchID and date of matches played by Team 1 and won by it.
d) Display the MatchID of matches played by Team 2 and not won by it.
e) Change the name of the relation TEAM to T_DATA. Also change the attributes TeamID and TeamName to T_ID and T_NAME respectively.

6. A shop called Wonderful Garments who sells school uniforms maintains a database SCHOOLUNIFORM as shown below. It consisted of two relations - UNIFORM and COST. They made UniformCode as the primary key for UNIFORM relations. Further, they used UniformCode and Size to be composite keys for COSTrelation. By analysing the database schema and database state, specify SQL queries to rectify the following anomalies.

a) M/S Wonderful Garments also keeps handkerchiefs of red colour, medium size of Rs. 100 each.
b) INSERT INTO COST (UCode, Size, Price) values (7, ‘M’,100);
$\quad$ When the above query is used to insert data, the values for the handkerchief without entering its details in the UNIFORM relation is entered. Make a provision so that the data can be entered in the COST table only if it is already there in the UNIFORM table.

c) Further, they should be able to assign a new UCode to an item only if it has a valid UName. Write a query to add appropriate constraints to the SCHOOLUNIFORM database.
d) Add the constraint so that the price of an item is always greater than zero.

7. Consider the following table named “Product”, showing details of products being sold in a grocery shop.

PCode PName UPrice Manufacturer
P01 Washing Powder 120 Surf
P02 Toothpaste 54 Colgate
P03 Soap 25 Lux
P04 Toothpaste 65 Pepsodent
P05 Soap 38 Dove
P06 Shampoo 245 Dove

Write SQL queries for the following:

a) Create the table Product with appropriate data types and constraints.
b) Identify the primary key in Product.
c) List the Product Code, Product name and price in descending order of their product name. If PName is the same, then display the data in ascending order of price.
d) Add a new column Discount to the table Product.
e) Calculate the value of the discount in the table Product as 10 per cent of the UPrice for all those products where the UPrice is more than 100, otherwise the discount will be 0 .
f) Increase the price by 12 per cent for all the products manufactured by Dove.
g) Display the total number of products manufactured by each manufacturer. Write the output(s) produced by executing the following queries on the basis of the information given above in the table Product:
h) SELECT PName, avg(UPrice) FROM Product GROUP BY Pname;
i) SELECT DISTINCT Manufacturer FROM Product;
j) SELECT COUNT (DISTINCT PName) FROM Product;
k) SELECT PName, MAX(UPrice), MIN(UPrice) FROM Product GROUP BY PName;

8. Using the CARSHOWROOM database given in the chapter, write the SQL queries for the following:

a) Add a new column Discount in the INVENTORY table.
b) Set appropriate discount values for all cars keeping in mind the following:
$\quad$ (i) No discount is available on the LXI model.
$\quad$ (ii) VXI model gives a 10 per cent discount.
$\quad$ (iii) A 12 per cent discount is given on cars other than LXI model and VXI model.
c) Display the name of the costliest car with fuel type “Petrol”.
d) Calculate the average discount and total discount available on Baleno cars.
e) List the total number of cars having no discount.



Table of Contents